Notes on startup and shutdown of organic fertilizer dryer

Boot Up:1. Check the equipment: Before starting the organic fertilizer dryer, check whether all parts of the organic fertilizer equipment are properly installed and there are no abnormalities to ensure that the equipment is in good working condition.2. Preheating: After starting the organic fertilizer dryer, it is usually necessary to preheat. According to the requirements of the equipment, the preheating time may be different to ensure that the equipment reaches the appropriate working temperature before being put into formal operation.3. Gradually increase the load: If you need to dry a large amount of organic fertilizer at one time, you should gradually increase the load, rather than putting all raw materials into it at one time, so as not to cause equipment overload.Halt:1. Stop feeding: Before stopping, the feeding of organic fertilizer should be stopped first to avoid the organic fertilizer staying in the equipment for too long, resulting in material accumulation or blockage in the dryer.2. Gradual load reduction: If the load of the equipment is large, the load should be gradually reduced, rather than suddenly stopped, so as to avoid impact and damage to the equipment.3. Clean the equipment: After the shutdown, the organic fertilizer dryer should be cleaned and maintained. Clean the dust and residue inside the equipment, keep the equipment clean, and timely clean the roller, screen and other parts that are easy to store materials.4. Turn off the power: After completely stopping the operation of the equipment, the power should be turned off to ensure that the equipment is in a safe state to prevent accidents.In summary, the correct startup and shutdown operation can ensure the safe operation and effective use of the organic fertilizer dryer, extend the service life of the equipment, and ensure the smooth progress of the production process of the organic fertilizer production line.